Zuken USA Webinar Series

Updated: Announcing Zuken USA’s Fall/Winter Webinar Series

If you’re in North America, please join us for our Fall/Winter Webinar Series that will run from September through March 2019. Over the following months, we’ll be covering a wide range of topics, from Silicon Expert to E3.series MCAD co-design. During each webinar, we’ll cover a common design challenge and present/demonstrate a solution. You’ll leave with takeaways that you can immediately apply to your daily activities.

Several webinars are already on the calendar. If you’re interested in a webinar but don’t think you can attend it live, register anyway to be the first to get the on-demand version.

If you’re outside North America, you won’t be able to register for the live version right now, but watch out for notifications about access to an on-demand version.


Top 5 Harness Manufacturing Challenges

Harness Manufacturing Challenges

September 26, 2018

A discussion about the Top 5 challenges in harness design and manufacturing has been long overdue. Harness manufacturing is growing driven by the electrification across industry lines. The challenges are consistent across industries for the most part without a consistent solution. We have heard pretty much all the challenges and worked on solutions with customers for over 40 years.


What is a Stretch-Rigid Circuit and How Do You Design It?

Stretchable Circuit

October 10, 2018

This webinar will explore the technology requirements and implementation best practices behind Stretchable Circuits, also known as Stretch-Rigid.  A number of industries including wearables, health and medical devices are taking advantage of this emerging technology. If you are new to Stretch-Rigid or are interested in design best practices, please join us for this webinar.


Connect Your Component Library to the Supply Chain and Avoid a Manufacturing Crisis

Connect Component Library and SupplyChainOctober 24, 2018

This webinar will discuss how a component data management system together with a trusted content provider, such as SiliconExpert, provides the backbone for making your design environment an accurate and robust source for engineering component selection.


Why is Electrical/Mechanical Collaboration Not Giving You Results?

November 7, 2018

Electrical and Mechanical Collaboration WebinarElectrical and mechanical collaboration has been discussed and desired for many years without a clear solution. The best workflow and process is still elusive to many design teams. The advantage of working with multiple teams using various domain tools has given our experts a unique perspective on the solution with the best probability of success.

The typical first step has been to use a common platform for electrical and mechanical design. This approach has proven to be a futile gamble in most cases. The gains from the collaboration are almost always wiped out by use of un-optimized tools for the electrical design.


Releasing Your Design to PLM is More Complicated Than You Thought

December 5, 2018

PLM Design Release

This webinar will discuss the different release profiles from WIP to a manufacturing-centric PLM system followed by the demonstration of best practices that can make the job easier and more reliable.

DS-CR, Zuken’s Design Data Management System, offers a reliable and controlled release of your WIP engineering data to PDM/Manufacturing.


Explore a Modern PCB Panelization Process

PCB PanelizationJanuary 16, 2019

This webinar will explore the benefits of a modern PCB panelization process that can lower manufacturing costs and give your control of the DFM process as soon as the actual board outline is determined. Learn how you can start with a PCB design that is still in the layout phase and instantiate it into a panel. We will explain what items are part of the PCB design and what items should be designed into the panel such as routing and v-cut details.


Electrical Wiring Checks Bring You Closer to Manufacturing Excellence

Electrical Wiring Checks

February 20, 2019

E3.series Wiring Checks works with your robust design data to create a step by step wiring and review system to accelerate deployment and manufacturing velocity. The system provides an efficient method to track, report and instruct a robust process to drive your amazing designs towards an amazing product.

Written by

Bob Potock is Vice President of Marketing for Zuken USA, Inc. and has held positions at companies that include Altium, Mentor Graphics, AT&T Bell Labs and Intel. Bob enjoys living in Colorado and a range of outside activities that include mountain biking, hiking, fly fishing and golf.

You may also like...