How to Generate Offset Vias from a Via in CR-8000 Design Force

Tech Tip: How to Generate Offset Vias from a Via in CR-8000 Design Force

CR-8000 Design Force 2017 has improved the offset via function by adding efficiency in pulling out tracks from vias, creating BGA designs and build-up designs. The controls are based on the following:

  • Qualified padstacks
  • Rule-based layer pair vias
  • Parameters specified in the offset via command panel

The following video shows how to set up and use the offset via feature in Design Force.

Written by

Jeff Perry is an Applications Engineer at Zuken USA.

You may also like...