Tagged: E3.panel

Electrical panel

Tech Tip: Creating Cable Ducts and/or Wire Combs in the E3.series Database

Cable ducts are special devices used in E3.panel that can be created with or without a definition in an E3.series database. These cable ducts can be created and placed on panel sheets; they’re used to route wires from one location to another. They can also be used with automatic routing functionality so the wires are routed from start to finish using the shortest path, which would be defined by the cable duct.

E3.series Panel Autoconnect

Panel Autoconnect: Optimizing an Enclosure using Autorouting in E3.series

This tip explains how to use Panel Autoconnect to define wire lengths in E3.series. After a schematic is defined and units are placed in E3.panel, Panel Autoconnect finds the shortest path for the connections defined in the schematic. If units are moved in panel, the length information is updated across modules, allowing users to optimize the enclosure to minimize wire lengths.

EFA France

Zuken Helps French Automotive and Special Vehicle Supplier Increase Global Turnover while Maintaining Quality

Several years ago, automotive supplier EFA France realised they were expanding at a rate beyond which their current electrical design setup could manage. With plans to increase their global turnover, while maintaining the high level of quality in their products that had caused their business to prosper in the first place, they needed a new solution.